Grundfos SMD.23.37 .980.5.1B Submersible mixers 98995970
Axial force: 560 N | Thrust-to-power ratio: 0.243 | Rated current: 6.1 A | Nominal flow rate: 174 l/s | Propeller diameter: 370 mm
In the profluid store simply buy online - for larger orders or scale discounts please contact us for an individual offer.
The offer is exclusively for professionals.
Grundfos 98995970 submersible agitators SMD.23.37 .980.5.1B
Product Number: 98995970
EAN number: 5712604896990
Direct-drive submersible agitators with motors from 0.9 to 3.5 kW for circulating and suspending liquids with low or medium viscosity. Grundfos SMD series of horizontal submersible agitators are designed for mixing, i.e. homogenizing and suspending, of liquids with low to medium viscosity.
Accessories
No installation set |
Tech. Details
| Product information | ||
| Product Information | Type | Submersible agitators |
| Product number |
98995970 | |
| Product Name |
SMD.23.37 .980.5.1B | |
| EAN number |
5712604896990 | |
| Electrical data |
Std. engine | IEC |
| Power consumption P1 | 2.7 kW | |
| Actual power consumption | 2.3 kW | |
| rated engine power P2 | 2.3 kW | |
| Net frequency | 50 Hz | |
| Dimensioning voltage | 3 x 400-415 V | |
| Voltage tolerance | +6/-10 % | |
| Designated current | 6.1 A | |
| startup current | 37 A | |
| Cos phi - power factor | 0.67 | |
| Cos phi at 3/4 load | 0.58 | |
| Cos phi at 1/2 load | 0.46 | |
| Motor efficiency at full load | 86.3% | |
| Efficiency of the engine at 3/4 load | 85.9% | |
| Motor efficiency at half load | 83.0% | |
| Motorpole | 6 | |
| Switch-on type | star/triangle | |
| Protection class (according to IEC 34-5) | IP68 | |
| Heat class (IEC 85) | H | |
| Explosion-proof | no | |
| Built-in motor protection | PTO (thermal switch) | |
| Cable length | 15 m | |
| Type of cable plug | No plug | |
| Installation |
Maximum installation depth | 20 m |
| Technical specifications |
Thrust-to-power ratio | 0.243 |
| Axial force | 560 N | |
| Nominal volume flow | 174 l/s | |
| Main flow velocity | 1.61 m/s | |
| Propeller speed | 980 1/min | |
| Propeller diameter | 370 mm | |
| Number of propeller blades | 2 | |
| Torque | K.A. | |
| Slip ring seal | LIP SEAL | |
| Support medium | Media temperature range | 5 ... 40 °C |
| pH range | 4-10 | |
| Materials | Motor | AISI 1.4408 |
| Propeller | 1.4408 | |
| Secondary shaft sealing | SIC/SIC | |
| Type of control. | Humidity sensor | with humidity sensor |
| Others | Net weight | 67 kg |
| Country of origin | HU | |
| Tariff No. | 84798200 | |
| Ex-description | K.A. | |
Properties:
The SMD immersion agitators are made entirely of stainless steel. The efficiency optimized propeller is directly driven by the motor. |
The squirrel-cage induction motor (efficiency class IE3) is protected against overload with the help of three bimetallic thermal switches (PTO) built into the windings. Optionally, the submersible agitators can also be equipped with three thermistors (PTC sensors). . |
To prevent the surrounding liquid from penetrating, the SMD submersible agitators have a multi-stage sealing system consisting of lip seals as a pre-seal, which press against the wear ring, and a double mechanical seal in cartridge design. The sealing surfaces of the outer mechanical seal are made of silicon carbide/silicon carbide and the sealing surfaces of the inner mechanical seal are made of synthetic carbon/ceramic. |
SMD submersible agitators from 1.9 kW are equipped with a humidity switch as standard. For submersible agitators up to 1.8 kW, a moisture switch can be installed as an option. |
For SMD submersible agitators from 1.9 kW, the oil-filled seal housing can be monitored for water ingress using an optional leakage sensor. In the event of moisture ingress, an alarm signal is emitted by the sensor and/or the motor is switched off. For this purpose, the sensor must be connected to the Grundfos relay ALR-20/A. |
The stainless steel shaft is supported with the help of two permanently lubricated ball bearings. |
The engine power ranges from 0.9 to 3.5 kW. |
A variety of stainless steel or galvanized steel accessories are available for easy installation and trouble-free operation. |
Worth knowing about Grundfos
Grundfos is one of the world's leading suppliers of high-efficiency pumps and the world market leader for circulators in heating technology. In addition to stainless steel pumps for industrial applications Grundfos offers innovative pumps for the building services and water management. As an authorized service partner, you will find in our profluid webshop a large selection of the extensive Grundfos range. Through excellent service, advice by phone and fast delivery, we offer a suitable we offer a suitable (pump) solution for almost every application. solution. You too can benefit from our large selection at top prices!