Grundfos SEV.80.13.4.50D Dirty water pump 96047757
Max. delivery head: 8.7 m | Max. operating pressure: 6 bar | Media temperature range: 0 ... 40 °C Operating pressure: 6 bar | Media temperature range: 0 ... 40 °C | Starting current: 22 A | Rated speed: 1440 1/min
In the profluid store simply buy online - for larger orders or scale discounts please contact us for an individual offer.
The offer is exclusively for professionals.
Grundfos 96047757 Dirty water pump SEV.80.80.13.4.50D
Product code: 96047757
EAN Number: 5700395070224
Dirty water pumps (1.1 to 11 kW) with SuperVortex vortex impeller. Depending on the size, the free passage is 50 to 100 mm. Non-self-priming, single-stage submersible pump for pumping sewage, service water and untreated raw sewage. The pump is suitable for both intermittent and continuous operation. Thanks to the maintenance-free cooling system, which does not require any cooling liquid, it is equally suitable for wet and dry installation. With efficiency-optimised SuperVortex vortex impeller with a free ball passage of 80 mm. For waste water with a dry matter content of up to 5 %. With service-friendly stainless steel clamping band for quick separation of motor and hydraulics. No special tools required. Pipe connection via DIN flange.
Accessories
No installation set |
Tech. Details
Product information | ||
Product information. | Type | Dirty water pump |
Product number |
96047757 | |
Product name |
SEV.80.80.13.4.50D | |
EAN number |
5700395070224 | |
Electrical data |
Power input P1 | 1.8 kW |
Mains frequency | 50 Hz | |
Design tension | 3 x 380-415 V | |
Voltage tolerance | +6/-10 % | |
Max starts per hour | 20 | |
rated current | 3.8-3.9 A | |
Maximum power consumption | K.A. | |
Start-up current | 22 A | |
current at idle | 2.5 A | |
Efficiency of the engine at full load | 71.7 % | |
Motor efficiency at 3/4 load | 69.6 % | |
Motor efficiency at half load | 63.9 % | |
Motorpole | 4 | |
Power-on | Direct | |
Isolation class (IEC 85) | K.A. | |
Explosion-protected | no | |
Cable length | 10 m | |
Cable type | 07RN8-F | |
Cable size | K.A. | |
Resistance | K.A. | |
Winding resistance | K.A. | |
Cos phi at zero load | 0.15 | |
cos phi 1/1 | 0.72 | |
cos phi 1/2 | 0.51 | |
cos phi 3/4 | 0.63 | |
Engine rated power P2 | 1.3 kW | |
Nominal current at 3/4 charge | 3.2 A | |
Nominal current at 1/2 charge | 2.9 A | |
Start-up moment | 23 Nm | |
Motor stall torque | 28 Nm | |
Moment of inertia | 0.0165 kg m² | |
Heat class (IEC 85) | F | |
Temperature protection | internal | |
Type of cable plug | No plug | |
size of the operating capacitor | K.A. | |
The size of the starting capacitor | K.A. | |
Installation |
Environmental temperature | K.A. |
Max. Operating pressure | 6 bar | |
Connection | DIN | |
Size of suction nozzle | K.A. | |
Size of pressure port | K.A. | |
Nominal pressure | PN 10 | |
Maximum installation depth | K.A. | |
Size | K.A. | |
Pressure connection | DN 80 | |
Maximum mounting depth | 20 m | |
Maximum ambient temperature | 40 °C | |
Explosion protection standard | K.A. | |
Technical data |
Maximum flow rate | 18.1 l/s |
Maximum head | 8.7 m | |
Wheel type | SUPER VORTEX | |
Maximum grain size | 80 mm | |
Approvals | K.A. | |
Cooling jacket (Yes/No) | K.A. | |
Designated speed | 1440 1/min | |
Sliding ring seal | SIC/SIC | |
Maximum hydraulic efficiency | 0.44 | |
characteristic tolerance | ISO9906:2012 3B2 | |
Cooling jacket | With cooling jacket | |
Supporting medium. | Media temperature range | 0 ... 40 °C |
Materials | Impeller material | Grey cast iron |
Impeller | EN 5.1301 EN-GJL-200 | |
Wheel material according to ASTM | K.A. | |
Motor | K.A. | |
Type of control | Temperature sensor | N |
Others | Net weight | 107 kg |
Gross weight | 119 kg | |
Shipping vol. | K.A. | |
Country of origin | HU | |
Tariff No. | 84137021 | |
Sales region | K.A. | |
Danish VVS No. | 391288244 | |
Fine LVI No. | K.A. | |
Norwegian NRF No. | K.A. |