Iwaki IX-D150 and IX-D300 dosing pump series

Iwaki dosing pumps IX D series
Control unit position

4,462.00 € 4,462.00 € 4462.0 EUR

4,462.00 €

Diese Kombination existiert nicht.

In the profluid store simply buy online - for larger orders or scale discounts please contact us for an individual offer.

The offer is exclusively for professionals.

Repair Service

Request repair certificate and spare parts lists

Application areas in dosing technology

Fields of application and possible uses of our dosing systems.

Contact for individual configurations

We offer the right solution for you. If you have any questions about the product, please call us.

Iwaki Dosing Pump IX D150 and IX D300 Series

With the Iwaki IX-D150 and IX-D300 highest precision and simple operation in every dosing application. With the IX series Iwaki extends its product range with digital, direct driven diaphragm pumps. Years of experience in motor technology made it possible to create a precise and energy-efficient dosing pump with very high resolution. The IX series meets all requirements of modern, automatic chemical dosing from water treatment to industrial processes.

Diaphragm dosing pump with direct current motor

Quiet and low-pulsation operation

Diaphragm break monitoring

Overpressure monitoring

Control unit with LCD display

Control via 4-20 mA signal, contact closure or Profibus (optional)

Plastic housing IP65
Wide range power supply 100-240V AC 50/60Hz

Model	Volume Rate Output Press.		Materials: Pump Head & O-ring-seal
IX-D150TCR-()-E	Max. 150 l/h Max. 10 Bar	R 3/4"	PVDF & FKM-A
IX-D150TER-()-E		R 3/4"	PVDF & EPDM
IX-D150TCFD-()-E		DN25	PVDF & FKM-A
IX-D150TEFD-()-E		DN25	PVDF & EPDM
IX-D150S6R-()-E		R 3/4"	SUS316 & PTFE
IX-D150S6FD-()-E		DN20	SUS316 & PTFE

IX-D300TCR-()-E	Max. 300 l/h Max. 5 Bar	R 1"	PVDF & FKM-A
IX-D300TER-()-E		R 1"	PVDF & EPDM
IX-D300TCFD-()-E		DN25	PVDF & FKM-A
IX-D300TEFD-()-E		DN25	PVDF & EPDM
IX-D300S6R-()-E		R 1"	SUS316 & PTFE
IX-D300S6FD-()-E		DN25	SUS316 & PTFE

Accessories (optional)	Model
Profibus Interface	PB-01
without plug and cable

Performance

Type	Pid on pressure side		Pis on suction side		NPSHr	Viscosity	Suction height	matching P-damper
	Delivery rate l/h	MPa/m	Suction velocity.%	Mpa/m				Materials
	Delivery rate l/h	MPa/m	Suction velocity.%	Mpa/m				SUS	PVC
IX-D150	up to 150	6,3x10-3	100	6,3x10-3	0.08 Mpa	300 cP (mPas)	2 m	5 l	5 l
	up to 113	2,3x10-3	75	3,6x10-3
	up to 75	7,0x10-4	50	1,6x10-3
	up to 15	1,8x10-5	25	4,0x10-4
IX-D300	up to 300	7,2x10-3	100	7,2x10-3
	up to 225	4,1x10-3	75	4,1x10-3
	up to 150	8,0x10-4	50	1,8x10-3
	up to 30	2,0x10-5	25	4,5x10-4

- Pi: Flow resistance per metre (based on pure water). The inner diameter of the suction pipe should be at least equal to that of the pump). Calculate the flow resistance per metre as follows: Pi = Pid (or Pis) x specific gravity x pipe length (m) x (inner diameter pump : inner diameter pipe)2 (MPa).
• The factory setting for suction speed is 100%. Reduce the speed for viscous or outgassing media to avoid cavitation. The suction speed is needed to control the maximum flow rate. e.g.: at a suction speed of 75%, the maximum flow rate is also 75% (45 l/h for an IX-C060)
• When conveying viscous media, the pumping capacity may be lower. This must be taken into account when selecting the pump size. In addition, the calibration accuracy also decreases at viscosities above 500 cP (mPas). A revision of the pipework may be necessary. Please contact us for viscosities above 1000 cP (mPas).
• Suitable pulsation dampers: Capacities are based on Iwaki standard damper sizes. Please contact us for more information.
- High accuracy: ± 1% (For the IX-C150S6, the flow rate deviation increases at flow rates ≤1.0 l/h. For the IX-C060S6, this is from ≤0.4 l/h.)
• Media temperature range: 0 - 50ºC (TC/TE), 0 - 80ºC (S6) / no change in viscosity, no solidification, no solids Precise calibration may not be possible for media temperatures above 60ºC and discharge pressures above 0.8 MPa. For optimum accuracy, calibrate the pump below these parameters.

Specification of the control unit
Display	LCD		16 x 2 LCD with backlight
	LED		Operation / Stop / Alarm
Operation	Push buttons		START / STOP MENU ESC Enter UP DOWN Left Right
Operating mode	MAN (Manual)		C060: 0.08 ml/h - 60 l/h, C150: 200 ml/h - 150 l/h
		Analogue	4 - 20, 0 - 20, 20 - 4, 20 - 0 mA
		Pulse	C060: 0.00625 ml/PLS - 120 ml/PLS, C150: 0.01560 ml/PLS - 300 ml/PLS
		Charge	C060: 6.25 ml/PLS - 120 l/PLS, C150: 15.6 ml/PLS - 300 l/PLS Note 1
		Charge Interval	Time: 0 - 9 days, 0 - 23 hours, 1 - 59 minutes Quantity: C060: 6.25 ml - 120 l, C150: 15.6 ml - 300 l Note 1
Control function	STOP		stops operation at signal input
	Suction		max. stroke frequency by simultaneous pressing of the up / down buttons
	Start interlock		stops operation at signal input
	AUX		Operation with max. stroke frequency at signal input
Input Note 2	STOP / Pre-STOP / AUX / Interlock		c
	Profibus Note 3		Communication protocol: Profibus-DP International standard: complies with EN50170 (IEC61158)
	Analogue		DC 0 - 20 mA (internal resistance is 200 Ω)
	Pulse		potential-free contact or open collector (max. pulse frequency is 100 Hz)
Output	Alarm 1 Note 4		potential-free contact (mechanical relay) AC 250 V, active load 3 A selectable: STOP, Pre-stop, start interlock, leakage detection and overload
	Alarm 2 Note 4		potential-free contact (PhotoMOS relay) AC/DC 24 V, 0.1 A selectable: STOP, Pre-STOP, start-up interlock, leakage detection and overload
	Electricity		DC 12 V max. 30 mA
Safety function	Membrane leakage detector		Pump stops if diaphragm is damaged
	Overload detector		Pump stops when pump load is too high
Supply voltage	AC 100 - 240 V 50 / 60 Hz

Note 1: The IX doses a preset volume per pulse in batch mode. Factory settings are 6.25 ml (C060) and 15.6 ml (C150). The volume per pulse varies during programming. After calibration, the setting can also be changed, but should be remeasured.
Note 2: Optional cables are required for the analog signal, pulse signal, start inhibit, stop, pre-stop and AUX inputs.
Note 3: Please contact us regarding the Profibus control.
Note 4: An optional signal cable is required for this output.
• We recommend using an earthing circuit breaker (FI) with 5 A nominal current and / or current sensitivity of 30 mA.

German

Fragen bei der Auswahl des richtigen Produkts ?

Fragen zu unserem Sortiment ? Wir beraten sie gerne telefonisch oder per Email.