Grundfos SE1.80.100.220.2.52S.H.N.51D.A submersible pump 99622498
Maximum delivery head: 46 m | Max. Operating pressure: 8 bar | Media temperature range: 0 ... 40 °C | Starting flow: 388/213 % | Rated speed: 2963 1/min
In the profluid store simply buy online - for larger orders or scale discounts please contact us for an individual offer.
The offer is exclusively for professionals.
Grundfos 99622498 Submersible pump SE1.80.100.220.2.52S.H.N.51D.A
Product number: 99622498
EAN Number: 5713832075195
Submersible pumps and dry-installed Grundfos SE/SL wastewater pumps (9-30 kW) are either equipped with: S-tube® (SE/SE1/SE2 and SL/SL1/SL2) or SuperVortex impeller (SLV). The free passage through the pump varies from 35-125 mm depending on the size and impeller variant. Non-self-priming, single-stage submersible pump for pumping wastewater, service water and untreated raw sewage. The pump is suitable for both intermittent and continuous operation. With cooling jacket, so that in addition to wet installation, dry installation is also possible without additional motor cooling. With S-tube® impeller with a free ball passage of 80 mm. For wastewater with a dry matter content of up to 3 %. With SmartTrim system for adjusting the impeller gap to maintain maximum performance throughout the pump's service life. With Grundfos SmartSeal sealing system for a leak-free connection to a coupling foot bend.
Accessories
No installation set |
Tech. Details
Product information | ||
Product information. | type | Submersible motor pump |
Product number |
99622498 | |
Product name |
SE1.80.100.220.2.52S.H.N.51D.A | |
EAN number |
5713832075195 | |
Electrical data |
Power input P1 | 25 kW |
Mains frequency | 50 Hz | |
Design tension | 3 x 380-415/660-690 V | |
Voltage tolerance | +10/-10 % | |
Max starts per hour | 20 | |
Designated current | 43-40/25-24 A | |
Maximum power consumption |
41 A | |
Start-up current | 388/213 % | |
Current at idle | 12.5 A | |
Efficiency of the engine at full load | 0.88 | |
Efficiency of the engine at 3/4 load | K.A. | |
motor efficiency at half load | 0.86 | |
Motorpole | 2 | |
Power-on | Y/D | |
Insulation class (IEC 85) | H | |
Explosion-protected | no | |
Cable length | 10 m | |
Cable type | S1BN8-F | |
Cable size | 7G4+5X1.5ST | |
Resistor | 4.95 mOhm/m | |
Winding resistor | 0.355 Ohm | |
Cos phi at zero load | K.A. | |
cos phi 1/1 | 0.89 | |
cos phi 1/2 | 0.81 | |
cos phi 3/4 | 0.87 | |
Motor rating P2 | K.A. | |
Nominal current at 3/4 charge | K.A. | |
Nominal current at 1/2 charge | K.A. | |
Start-up moment | K.A. | |
Motor stall torque | K.A. | |
Torque of inertia | K.A. | |
Heat class (IEC 85) | K.A. | |
Temperature protection | K.A. | |
type of cable plug | K.A. | |
size of the operating capacitor | K.A. | |
The size of the starting capacitor | K.A. | |
Installation |
Environmental temperature | -20 ... 40 °C |
Max. Operating pressure | 8 bar | |
Connector | DIN | |
Size of the intake manifold | DN 100 | |
Size of pressure port | DN 100 | |
Nominal pressure | PN 10 | |
Maximum installation depth | 20 m | |
Size | 52 | |
Pressure port connection | K.A. | |
Maximum mounting depth | K.A. | |
Maximum ambient temperature | K.A. | |
Explosion protection standard | K.A. | |
Technical data |
Maximum flow rate | 56.1 l/s |
Maximum head | 46 m | |
Type of impeller | S-TUBE | |
Maximum grain size | 80 mm | |
Approvals | CE,EAC,RCM | |
Cooling jacket (Yes/No) | Y | |
Bauging speed | 2963 1/min | |
Slip ring seal | K.A. | |
Maximum hydraulic efficiency | K.A. | |
characteristic tolerance | K.A. | |
Cooling jacket | K.A. | |
Promoting medium | Media temperature range | 0 ... 40 °C |
Materials | Impeller material | Grey cast iron |
Impeller | EN 1561 EN-GJL-250 | |
Impeller material in accordance with ASTM | ASTM A48-35B | |
engine | Grey cast iron | |
Type of control | Temperature sensor | K.A. |
Others | Net weight | 375 kg |
Gross weight | 416 kg | |
Shipping vol. | 1.65 m³ | |
Country of origin | HU | |
Tariff No. | 84137021 | |
Sales region | K.A. | |
Danish VVS No. | K.A. | |
Fine LVI No. | K.A. | |
Norwegian NRF No. | K.A. |