Grundfos SEV.65.80.22.A.2.50D waste water pump 96177656
Max. delivery head: 18.2 m | Max. operating pressure: 6 bar | Media temperature range: 0 ... 40 °C Operating pressure: 6 bar | Media temperature range: 0 ... 40 °C | Starting current: 37 A | Rated speed: 2895 1/min
In the profluid store simply buy online - for larger orders or scale discounts please contact us for an individual offer.
The offer is exclusively for professionals.
Grundfos 96177656 Dirty water pump SEV.65.80.22.A.2.50D
Product code: 96177656
EAN Number: 5700830442425
Dirty water pumps (1.1 to 11 kW) with SuperVortex vortex impeller. Depending on the size, the free passage is 50 to 100 mm. Non-self-priming, single-stage submersible pump for pumping sewage, service water and untreated raw sewage. The pump is suitable for both intermittent and continuous operation. Thanks to the maintenance-free cooling system, which does not require any cooling liquid, it is equally suitable for wet and dry installation. With efficiency-optimised SuperVortex vortex impeller with a free ball passage of 65 mm. For waste water with a dry matter content of up to 5 %. With service-friendly stainless steel clamping band for quick separation of motor and hydraulics. No special tools required. Pipe connection via DIN flange.
Accessories
No installation set |
Tech. Details
Product information | ||
Product information. | Type | Dirty water pump |
Product number |
96177656 | |
Product name |
SEV.65.80.22.A.2.50D | |
EAN number |
5700830442425 | |
Electrical data |
Power Consumption P1 | 2.8 kW |
Mains frequency | 50 Hz | |
Designated stress | 3 x 380-415 V | |
Voltage tolerance | +6/-10 % | |
Max starts per hour | 20 | |
rated current | 5.1-5.0 A | |
Maximum power consumption | K.A. | |
Start-up current | 37 A | |
current at idle | 0.083333333333 | |
Efficiency of the engine at full load | 0.77 | |
Motor efficiency at 3/4 load | 76.6 % | |
motor efficiency at half load | 73.5 % | |
Motorpole | 2 | |
Power-on | Direct | |
Isolation class (IEC 85) | K.A. | |
Explosion-protected | no | |
Cable length | 10 m | |
Cable type | 07RN8-F | |
Cable size | K.A. | |
Resistor | K.A. | |
Winding resistance | K.A. | |
Cos phi at zero load | 0.21 | |
cos phi 1/1 | 0.86 | |
cos phi 1/2 | 0.72 | |
cos phi 3/4 | 0.81 | |
Engine rated power P2 | 2.2 kW | |
Nominal current at 3/4 charge | 3.8 A | |
Nominal current at 1/2 charge | 0.125 | |
start-up moment | 18 Nm | |
Motor stall torque | 23 Nm | |
Torque of inertia | 0.0088 kg m² | |
Heat class (IEC 85) | F | |
Temperature protection | Internally | |
Type of cable plug | No plug | |
size of the operating capacitor | K.A. | |
The size of the starting capacitor | K.A. | |
Installation |
Environmental temperature | K.A. |
Max. Operating pressure | 6 bar | |
Connection | DIN | |
Size of suction nozzle | K.A. | |
Size of pressure port | K.A. | |
Nominal printing | PN 10 | |
Maximum installation depth | K.A. | |
Size | K.A. | |
Pressure port connection | DN 80 | |
Maximum built-in depth | 20 m | |
Maximum ambient temperature | 40 °C | |
Explosion protection standard | K.A. | |
Technical data |
Maximum flow rate | 12.5 l/s |
Maximum head | 18.2 m | |
Wheel type | SUPER VORTEX | |
Maximum grain size | 65 mm | |
Approvals | K.A. | |
Cooling jacket (Yes/No) | K.A. | |
Bauging speed | 2895 1/min | |
Sliding ring seal | SIC/SIC | |
Maximum hydraulic efficiency | 0.3 | |
characteristic tolerance | ISO9906:2012 3B2 | |
Cooling jacket | With cooling jacket | |
Supporting medium. | Media temperature range | 0 ... 40 °C |
Materials | Impeller material | Grey cast iron |
Wheels | EN 5.1301 EN-GJL-200 | |
Wheel material according to ASTM | K.A. | |
engine | K.A. | |
Type of control | Temperature sensor | Y |
Others | Net weight | 111 kg |
Gross weight | 123 kg | |
Shipping vol. | K.A. | |
Country of origin | HU | |
Tariff No. | 84137021 | |
Sales region | K.A. | |
Danish VVS No. | K.A. | |
Fine LVI No. | K.A. | |
Norwegian NRF No. | K.A. |