Grundfos SE1.80.100.15.4.50D.B wastewater pump 96048005
Max. delivery head: 8.5 m | Max. operating pressure: 6 bar | Media temperature range: 0 ... 40 °C Operating pressure: 6 bar | Media temperature range: 0 ... 40 °C | Starting current: 22 A | Rated speed: 1435 1/min
In the profluid store simply buy online - for larger orders or scale discounts please contact us for an individual offer.
The offer is exclusively for professionals.
Grundfos 96048005 sewage pump SE1.80.100.15.4.50D.B
Product number: 96048005
EAN Number: 5700395062694
Sewage pumps (1.1 to 11 kW) with S-tube impeller (SE1) or SuperVortex vortex impeller (SEV). Depending on the size, the free passage is 50 to 100 mm. Non-self-priming, single-stage submersible pump for pumping sewage, service water and untreated raw sewage. The pump is suitable for both intermittent and continuous operation. Thanks to the maintenance-free cooling system, which does not require any cooling liquid, it is equally suitable for wet and dry installation. With S-tube® impeller with a free ball passage of 80 mm. For waste water with a dry matter content of up to 3 %. With service-friendly stainless steel clamping band for quick separation of motor and hydraulics. No special tools required. Pipe connection via DIN flange.
Accessories
No installation set |
Tech. Details
Product information | ||
Product information. | Type | Waste water pump |
Product number |
96048005 | |
Product name |
SE1.80.100.15.4.50D.B | |
EAN number |
5700395062694 | |
Electrical data |
Power consumption P1 | 2.1 kW |
Mains frequency | 50 Hz | |
Design tension | 3 x 380-415 V | |
Voltage tolerance | +6/-10 % | |
Max starts per hour | 20 | |
rated current | 4.2-4.2 A | |
Maximum power consumption | K.A. | |
Start-up current | 22 A | |
current at idle | 2.5 A | |
Efficiency of the engine at full load | 0.72 | |
Motor efficiency at 3/4 load | 0.71 | |
motor efficiency at half load | 0.67 | |
Motorpole | 4 | |
Power-on | Direct | |
Insulation class (IEC 85) | K.A. | |
Explosion-protected | no | |
Cable length | 10 m | |
Cable type | 07RN8-F | |
Cable size | K.A. | |
Resistance | K.A. | |
Winding resistance | K.A. | |
Cos phi at zero load | 0.15 | |
cos phi 1/1 | 0.76 | |
cos phi 1/2 | 0.56 | |
cos phi 3/4 | 0.68 | |
Engine rated power P2 | 1.5 kW | |
Nominal current at 3/4 charge | 3.4 A | |
Nominal current at 1/2 charge | 0.125 | |
Start-up torque | 23 Nm | |
Motor stall torque | 28 Nm | |
Torque of inertia | 0.0468 kg m² | |
Heat class (IEC 85) | F | |
Temperature protection | Internal | |
Type of cable plug | No plug | |
size of the operating capacitor | K.A. | |
The size of the starting capacitor | K.A. | |
Installation |
Environmental temperature | K.A. |
Max. Operating pressure | 6 bar | |
Connection | DIN | |
Size of the suction nozzle | K.A. | |
Size of pressure port | K.A. | |
Name printing | PN 10 | |
Maximum installation depth | K.A. | |
Size | K.A. | |
Pressure port connection | DN 100 | |
Maximum built-in depth | 20 m | |
Maximum ambient temperature | K.A. | |
Explosion protection standard | K.A. | |
Technical data |
Maximum flow rate | 35.6 l/s |
Maximum head | 8.5 m | |
Wheel type | S-TUBE | |
Maximum grain size | 80 mm | |
Approvals | K.A. | |
Cooling jacket (Yes/No) | K.A. | |
Designated speed | 1435 rpm | |
Sliding ring seal | SIC/SIC | |
Maximum hydraulic efficiency | 0.72 | |
characteristic tolerance | ISO9906:2012 3B2 | |
Cooling jacket | With cooling jacket | |
Supporting medium. | Media temperature range | 0 ... 40 °C |
Materials | Impeller material | Grey cast iron |
Impeller | EN 5.1301 EN-GJL-250 | |
Wheel material according to ASTM | K.A. | |
Engine | K.A. | |
Type of control | Temperature sensor | N |
Others | Net weight | 109 kg |
Gross weight | 121 kg | |
Shipping vol. | K.A. | |
Country of origin | HU | |
Tariff No. | 84137021 | |
Selling region | K.A. | |
Danish VVS No. | 391286256 | |
Fine LVI No. | K.A. | |
Norwegian NRF No. | K.A. |